![Single Wall mounted Propagation Station - Sky](http://houseoftwotrees.com/cdn/shop/products/7B88052E-DD90-40AF-9C92-1CE68B5966E5_1_201_a.jpg?v=1649317174&width=480)
![Single Wall mounted Propagation Station - Sky](http://houseoftwotrees.com/cdn/shop/products/D2D6460A-1F6F-4B2E-9F85-2672718BFD7F_1_105_c.jpg?v=1649317174&width=480)
Single Wall mounted Propagation Station - Sky
Wall mounted Propagation station in Sky.
Tube includes
1 x Wall bracket
1 x 24mm x 150mm Test Tube
2 x Solid Brass Slot Screws
2 x Red Rawl Plugs
Fixing Steps
- Firstly, decide whether which way you would like the bracket.
- Place the bracket to the wall/Surface ensuring it is level and mark the wall where the fixing holes are.
- Remove the bracket. Using a 5 drill bit drill two holes deep enough for the Rawl plug.
- Once drilled push a Rawl plug into each hole (you may need to use a hammer to lightly tap into place) Ensure that the Rawl Plug is flush with the wall/Surface.
- Line the bracket with the holes and slowly screw them in with a flat head screw driver. Do not use a drill or imact driver as this can break the screw or you may slip and mark the bracket.
- Once fixed remove the tissue from the test tube and feed through the bracket.
- Now you are ready to fill with water or soil :)